Copper alloy strip for automotive terminals and connectors
We supply strip to the stamping plants and terminal makers that feed automotive wire harness, connector and power distribution programmes. The tables below give the grades usually specified for each kind of part.
Signal and plug-in terminals
Terminals in connector housings have to hold their contact force through years of heat and vibration. Copper-nickel-silicon grades do this at higher conductivity than phosphor bronze; low-tin bronzes and tin brass cover the positions where cost matters more than temperature rating.
| Grade | UNS | Conductivity %IACS | Tensile strength MPa | Alloy |
|---|---|---|---|---|
| C19010 | C19010 | ≥ 55 | 360 – 590 | C19010 Copper-Nickel-Silicon Strip |
| C7025 | C70250 | ≥ 40 | 620 – 860 | C7025 Copper-Nickel-Silicon Strip |
| C50715 | C50715 | ≥ 35 | 390 – 620 | C50715 Tin Bronze Strip (CuSn2Fe0.1P) |
| C50710 | C50710 | ≥ 32 | 315 – 705 | C50710 Tin Bronze Strip (Cu-Sn-Ni-P) |
| C4250 | C42500 | ≥ 26 | 295 – 650 | C42500 (C4250) Tin Brass Strip |
| C5191 | C51900 | 13 – 15 | 315 – 685 | C5191 Phosphor Bronze Strip |
Fuse box, junction box and high-current terminals
Where a terminal carries tens of amps, the heat it generates falls as conductivity rises. These grades keep conductivity high while staying strong enough to stamp and to hold a blade or tab.
| Grade | UNS | Conductivity %IACS | Tensile strength MPa | Alloy |
|---|---|---|---|---|
| C14415 | C14415 | ≥ 90 | 195 – 510 | C14415 Copper-Tin Strip (CuSn0.15) |
| C151 | C15100 | ≥ 90 | 245 – 490 | C15100 (C151) Copper-Zirconium Strip |
| C19720 | C19720 | 80 | 365 – 505 | C19720 High-Conductivity Copper Alloy Strip |
| C19400 | C19400 | ≥ 60 | 365 – 550 | C19400 Copper-Iron Strip |
| C18140 | C18140 | 85 | 393 – 490 | C18140 Copper-Chromium-Zirconium Strip |
Busbars and battery connections
Pure copper for busbars, battery tabs and flexible links in battery packs and power electronics.
High-voltage connectors, charging and energy storage
Electric vehicle drivetrains, charging connectors and battery energy storage systems carry far higher currents than a conventional harness. The terminals use high-conductivity alloys that keep their strength at temperature; the links between cells and modules are pure copper.
| Grade | UNS | Conductivity %IACS | Tensile strength MPa | Alloy |
|---|---|---|---|---|
| C18140 | C18140 | 85 | 393 – 490 | C18140 Copper-Chromium-Zirconium Strip |
| C19010 | C19010 | ≥ 55 | 360 – 590 | C19010 Copper-Nickel-Silicon Strip |
| C7025 | C70250 | ≥ 40 | 620 – 860 | C7025 Copper-Nickel-Silicon Strip |
| C17510 | C17510 | 45 – 48 | 310 – 793 | C17510 High-Conductivity Beryllium Copper Strip |
| C1020 | C10200 | ≥ 100 | 195 – 315 | C1020 Oxygen-Free Copper Strip |
| C1100 | C11000 | 101 | 262 – 379 | C1100 ETP Copper Strip |
How we supply stamping plants
- Strip slit to each width on your list, in the thickness and temper your tooling was set up for. Thickness by alloy: beryllium copper, copper-titanium and other high-performance alloys 0.03 mm to 0.25 mm; phosphor bronze and other alloys 0.08 mm to 1.8 mm; pure copper 0.10 mm to 6.0 mm.
- Quoted to the UNS, EN or JIS designation on your drawing; we confirm the equivalent before quoting.
- Every coil carries its lot number and ships with the test certificate, so incoming inspection has what it needs.
- Repeat orders against a forecast or a blanket order, shipped by sea or air. See export supply and supply to Europe.
- Samples and small qualification lots with the same documents as production shipments.
What to send for a quotation
Grade and temper, thickness and width with tolerances, monthly or annual quantity, and the destination port. If the grade is still open, send the part drawing and the current it carries and we will propose grades with the trade-offs.
Related guides
Request a quotation
Send us the grade, temper, thickness, width and quantity. We reply within one working day.
Send RFQ