Phosphor bronze or beryllium copper for springs (C5210 vs C17200)
C5210 (CuSn8, 470 to 885 MPa, about 12 % IACS) is the economical spring alloy for most contacts and needs no heat treatment after forming. C17200 reaches above 1,300 MPa after age hardening, conducts 22 to 28 % IACS and keeps its spring force better at elevated temperature and over many cycles; choose it for small, highly stressed springs, high-cycle contacts and parts that run warm.
Side-by-side data
| C5210 | C17200 | |
|---|---|---|
| UNS | C52100 | C17200 |
| Equivalents | EN CuSn8 / CW453K; JIS C5210; GB QSn8-0.3 | EN CuBe2 / CW101C; JIS C1720; GB QBe2 (TBe2) |
| Composition % | Sn 7.0 – 9.0, P 0.03 – 0.35, Cu + Sn + P ≥ 99.7 | Be 1.80 – 2.00, Co + Ni ≥ 0.20, Co + Ni + Fe ≤ 0.60 |
| Conductivity %IACS | ≈ 12 | 22 – 28 |
| Tensile strength MPa | 470 – 885 | 410 – 1520 |
| Tempers | 1/2H, H, EH, SH, ESH | A (TB00), 1/4H (TD01), 1/2H (TD02), H (TD04), AT (TF00), 1/2HT (TH02), HT (TH04) |
| Elastic modulus | 110 GPa | 131 GPa |
| Density | 8.80 g/cm³ | 8.25 g/cm³ |
Tensile strength is the range across supplied tempers. Full composition, tempers and physical properties are on each grade page.
Choose C5210 when
- Stress levels are moderate and the part is not miniaturised
- Cost and simple processing matter: no age hardening
- The part operates near room temperature
Choose C17200 when
- The spring is small and highly stressed
- It must survive a very large number of cycles
- It runs warm and must not lose contact force
Notes
C17200 is supplied either age-hardenable (formed, then heat treated) or mill-hardened (ready to use); the grade page explains the choice. It contains beryllium, so grinding, welding or machining dust should be handled under the supplier's safety guidance. Copper-titanium is another high-strength option; see the beryllium copper vs copper-titanium guide.
Questions buyers ask
Can C17200 be bought already hardened?
Yes. Mill-hardened tempers are supplied ready to stamp, with no heat treatment at your plant. They are less formable than the age-hardenable tempers, so tight bends may need the age-hardenable route.
Need a recommendation for a specific part?
Tell us the part function, strip thickness and performance targets. We reply within one working day, and sample coils are available for comparative trials.
Material development support