Bobon Copper

Products / C52100

C5210 Phosphor Bronze Strip

C5210 is the 8 % tin spring-grade phosphor bronze. It gives more strength and spring force than C5191 with good bend formability and fatigue life, and is the usual choice for high-cycle connector and switch springs.

Equivalent designations

SystemDesignation
UNSC52100
ENCuSn8 / CW453K
JISC5210
GBQSn8-0.3

Typical applications

  • Connector contacts
  • Switch and relay springs
  • High-cycle springs
  • Terminals

Chemical composition (%)

ElementContent
Sn7.0 – 9.0
P0.03 – 0.35
Cu + Sn + P≥ 99.7

Physical properties

PropertyValue
Density8.80 g/cm³
Elastic modulus110 GPa
Electrical conductivity≈ 12 % IACS

Tempers and tensile strength

TemperConditionTensile strength (MPa)
1/2HHalf hard470 – 610
HHard590 – 705
EHExtra hard685 – 785
SHSpring hard735 – 835
ESHExtra spring hard770 – 885

Values follow the limits of the governing standard. The mill test certificate for each lot states the measured values.

Supply range

ItemValue
FormCoil
Thickness and widthSupplied to your specification
Minimum orderQuoted with each enquiry
Lead timeEx-stock items ship within 48 hours; other items quoted with each enquiry

Questions buyers ask

When should C5210 be chosen over C5191?

When the spring must hold more contact force in the same space or survive more cycles. C5210 is stronger at each temper; C5191 is slightly more conductive and more economical.

What documents come with each shipment?

The original mill test certificate for the heat lot and a packing list with coil numbers. RoHS and REACH declarations are provided on request.

Related selection guides

Request a quotation

Send us the grade, temper, thickness, width and quantity. We reply within one working day.

Send RFQ