Bobon Copper

Guides

C2680 vs C2600 brass: 65/35 (H65) or 70/30 (H70)

Both conduct at about 27 to 28 % IACS. C2680 (65/35, GB H65) contains more zinc and is the economical choice for general stamped terminals, contacts and shielding. C2600 (70/30 cartridge brass, GB H70) contains more copper and is chosen for deep drawing and severe forming, or wherever the drawing calls for 70/30.

Side-by-side data

C2680C2600
UNSC26800C26000
EquivalentsEN CuZn33 / CW506L; JIS C2680; GB H65EN CuZn30 / CW505L; JIS C2600; GB H70
Composition %Cu 64.0 – 68.0, Pb ≤ 0.05, Fe ≤ 0.05Cu 68.5 – 71.5, Pb ≤ 0.07, Fe ≤ 0.05
Conductivity %IACS≈ 2728
Tensile strength MPa275 – 620372 – 648
TempersO, 1/4H, 1/2H, H, EHH01, H02, H04, H06, H08
Elastic modulus–110 GPa
Density8.47 g/cm³8.53 g/cm³

Tensile strength is the range across supplied tempers. Full composition, tempers and physical properties are on each grade page.

Choose C2680 when

Choose C2600 when

Notes

Neither brass is a spring alloy for contacts that must keep pressing for years; for that, move to phosphor bronze or a copper-nickel-tin alloy. Brass can suffer stress-corrosion cracking in ammonia-bearing atmospheres.

Questions buyers ask

Is H65 the same as C2680?

They correspond: GB H65, JIS C2680, UNS C26800 and EN CuZn33. Likewise H70 corresponds to C2600, UNS C26000 and EN CuZn30.

Need a recommendation for a specific part?

Tell us the part function, strip thickness and performance targets. We reply within one working day, and sample coils are available for comparative trials.

Material development support