C1100 vs C1020: ETP copper or oxygen-free copper (T2 vs TU1)
Both conduct at about 100 % IACS, so the choice is about oxygen, not conductivity. C1100 (ETP copper, Cu ≥ 99.90 %) is the standard, more economical choice for busbars, shunts and stamped conductors that are joined mechanically or by soldering. Choose C1020 (oxygen-free, Cu ≥ 99.96 %, O ≤ 10 ppm) when the part will be brazed, welded or annealed in a hydrogen-bearing atmosphere, where the oxygen in ETP copper can cause embrittlement, or for vacuum and electronic devices.
Side-by-side data
| C1100 | C1020 | |
|---|---|---|
| UNS | C11000 | C10200 |
| Equivalents | EN Cu-ETP / CW004A; JIS C1100; GB T2 | EN Cu-OF / CW008A; JIS C1020; GB TU1 / TU2 |
| Composition % | Cu (incl. Ag) ≥ 99.90 | Cu ≥ 99.96, O ≤ 10 ppm |
| Conductivity %IACS | 101 | ≥ 100 |
| Tensile strength MPa | 262 – 379 | 195 – 315 |
| Tempers | H01, H02, H04, H08 | O, 1/4H, 1/2H, H |
| Elastic modulus | 117 GPa | 117 GPa |
| Density | 8.91 g/cm³ | 8.94 g/cm³ |
Tensile strength is the range across supplied tempers. Full composition, tempers and physical properties are on each grade page.
Choose C1100 when
- Busbars, earth strips and connectors are bolted, crimped or soldered
- Cost matters and the drawing allows ETP copper
- Thicker gauges are needed: we supply pure copper strip from 0.10 to 6.0 mm
Choose C1020 when
- The part is hydrogen-brazed, welded or annealed in a reducing atmosphere
- It goes into vacuum, electron or high-reliability electronic devices
- The drawing or customer specification calls for OF copper or TU1
Notes
For the highest purity (Cu ≥ 99.99 %), C10100 (OFE) is the next step up; see the oxygen-free copper guide. Neither C1100 nor C1020 is a spring material: where a pure-copper part needs to hold its shape after heating, consider silver-bearing copper C10700.
Questions buyers ask
Is T2 the same as C1100?
They are the corresponding grades in the Chinese GB and the Japanese/US systems: GB T2, JIS C1100, UNS C11000 and EN Cu-ETP. Composition limits differ slightly between standards, so state which standard applies when ordering.
Is TU1 the same as C1020?
TU1 and TU2 are the GB oxygen-free coppers that correspond to JIS C1020, UNS C10200 and EN Cu-OF.
Need a recommendation for a specific part?
Tell us the part function, strip thickness and performance targets. We reply within one working day, and sample coils are available for comparative trials.
Material development support