Products / C63000
C63000 Nickel Aluminium Bronze Rod and Bar
C63000 is a wrought nickel aluminium bronze with about 10 % aluminium and 5 % nickel. It combines tensile strength around 700 to 760 MPa with good wear, galling and seawater corrosion resistance, and is used for heavily loaded bushings, bearings and marine hardware.
Equivalent designations
| System | Designation |
|---|---|
| UNS | C63000 |
| EN | CuAl10Ni5Fe4 / CW307G |
| GB | QAl10-4-4 |
Typical applications
- Landing gear bushings and bearings
- Pump shafts and valve stems
- Marine fasteners and hardware
- Gears, cams and wear plates
- Valve guides and seats
Chemical composition (%)
| Element | Content |
|---|---|
| Al | 9.0 – 11.0 |
| Ni | 4.0 – 5.5 |
| Fe | 2.0 – 4.0 |
| Mn | ≤ 1.5 |
| Si | ≤ 0.25 |
| Cu | Balance |
Physical properties
| Property | Value |
|---|---|
| Density | 7.58 g/cm³ |
| Elastic modulus | 117 GPa |
| Electrical conductivity | 7 % IACS |
Tempers and tensile strength
| Temper | Condition | Tensile strength (MPa) |
|---|---|---|
| Annealed bar | Diameter up to 50 mm | 758 |
| Annealed bar | Diameter 50 to 75 mm | 724 |
| Annealed bar | Diameter 75 to 125 mm | 689 |
Typical values for annealed bar. The mill test certificate for each lot states the measured values.
Supply range
| Item | Value |
|---|---|
| Form | Rod, bar, plate and forgings |
| Sizes | Supplied to your specification |
| Minimum order | Quoted with each enquiry |
| Lead time | Quoted with each enquiry |
Questions buyers ask
What is the difference between C63000 and C95800?
C63000 is a wrought alloy supplied as rod, bar and plate and is stronger. C95800 is a casting alloy used for pump, valve and propeller castings in seawater.
What documents come with each shipment?
The original mill test certificate for the heat lot and a packing list with coil numbers. RoHS and REACH declarations are provided on request.
Request a quotation
Send us the grade, temper, thickness, width and quantity. We reply within one working day.
Send RFQ