NB105 vs NB109: copper-nickel-tin alloys for automotive terminals
NB105 and NB109 are sister alloys that differ in tin content. NB105 conducts better, 50 % IACS with 300 to 550 MPa. NB109 is stronger, 40 % IACS with 440 to 590 MPa. Choose NB105 for higher-current terminals and busbars, and NB109 for smaller terminals that rely on spring force.
Side-by-side data
| NB105 | NB109 | |
|---|---|---|
| UNS | C19020 | C19025 |
| Equivalents | JASO JC400 | JASO JC400 |
| Composition % | Ni 1.0, Sn 0.50, P 0.05 | Ni 1.0, Sn 0.90, P 0.05 |
| Conductivity %IACS | 50 | 40 |
| Tensile strength MPa | 300 – 550 | 440 – 590 |
| Tempers | 1/4H, 1/2H, H, EH | 1/2H, H, EH |
| Elastic modulus | 130 GPa | 130 GPa |
| Density | 8.9 g/cm³ | 8.9 g/cm³ |
Tensile strength is the range across supplied tempers. Full composition, tempers and physical properties are on each grade page.
Choose NB105 when
- The terminal, junction box part or busbar carries higher current
- Softer tempers are needed for forming
Choose NB109 when
- The terminal is small and contact force is the priority
- The drawing calls for 40 % IACS class material at higher strength
Notes
Both are registered copper alloys, UNS C19020 and C19025, and both are referenced by the JASO automotive terminal material standard.
Questions buyers ask
Can NB105 and NB109 be used in the same connector?
Yes. A common split is NB105 for the power pins and NB109 for the smaller signal terminals.
Need a recommendation for a specific part?
Tell us the part function, strip thickness and performance targets. We reply within one working day, and sample coils are available for comparative trials.
Material development support